Remember how excited I was a couple days ago that our cryostat was closed and pumping? Well, it turns out that it had a leak, and a big one at that. After some time trying to debug where the leak was coming from and only being able to vaguely determine it came from somewhere near the window, we vented the cryostat and put the whole window assembly on its small test setup (to avoid having to repump the entire cryostat just to leak check the window). We were able to determine that the glue joint that held our plastic window to an aluminum sealing ring
(that then mated to a regular rubber o-ring) had nearly completely
de-bonded at some point between our testing in Texas and here, and it turns out that broken epoxy is a terrible vacuum seal (no surprise there).
After mulling over various options, we decided to eliminate the aluminum ring completely and sand the window smooth enough to mate with the o-ring directly. This approach has worked successfully on various other experiments, and we were able to make it work for us as well. We also did a thermal test by leaving the window test setup outside for an hour or so until it got to about -10C and found that it still held vacuum.
Elsewhere in the high bay, the gondola team got the star cameras mounted to the inner frame and some of the other electronics boxes mounted, Franky and Jeff continued work on the BROs, and Kyle worked on checking out one of our so-called "general housekeeping" (GHK) boards that reads various sensors from around the gondola and controls other bits of hardware.
Kyle, Shaul, and I ended up staying late at the high bay to finish the leak testing and re-close the cryostat. We got back to McMurdo a little before 10PM, and I went straight to bed.
No pictures today, since we were pretty busy. Now go vote!
Tuesday, November 6, 2012
Sunday, November 4, 2012
Day 12, November 5, 2012 -- Hut Point
A lot of activity in the high bay today -- Michele and I started populating the inner frame with hardware, Britt buttoned up the ACS for the (hopefully) final time, Franky and Jeff worked on various DfMUX-related issues, and the CSBF crew installed the SIP on the EBEX gondola. We also did a first, rough, leak check on the EBEX cryostat and found no evidence for leaks -- hopefully tomorrow we'll be able to do a more sensitive test. In addition, a few of us had light vehicle driver training, so we are now qualified to drive the NSF red vans in case we need to make trips to/from the high bay outside of the regular shuttle hours. We took the opportunity to drive one of the vans back to McMurdo from LDB at the day's end, which was much faster than taking Ivan The Terra Bus.
After dinner, a fair number of us took a trip out to Hut Point to check it out. Not only is the view from there amazing, with vast vistas stretching out across the ice shelf, there are also seals! Weddell seals, to be specific, which are the only Antarctic seal species to hang out on solid sea ice rather than broken-up pack ice (as we learned during the Sunday night science lecture). There were even some pups!
Pictures:
https://picasaweb.google.com/104253244018605213307/EBEXInAntarctica20121105
After dinner, a fair number of us took a trip out to Hut Point to check it out. Not only is the view from there amazing, with vast vistas stretching out across the ice shelf, there are also seals! Weddell seals, to be specific, which are the only Antarctic seal species to hang out on solid sea ice rather than broken-up pack ice (as we learned during the Sunday night science lecture). There were even some pups!
Pictures:
https://picasaweb.google.com/104253244018605213307/EBEXInAntarctica20121105
Saturday, November 3, 2012
Day 11, November 4, 2012 -- In like Flynn
After pumping overnight with on our vacuum roughing pump, we set up the cryostat today to pump with our two turbomolecular pumps to prepare the cryostat for cooling in the next few days. In the process, I cleaned up a bit and rearranged things in the high bay to prepare for moving the gondola inner frame, which had heretofore been languishing in its shipping container out on the ice, into the high bay.
In the afternoon, Michele, Shaul, and I went out into the cold to bring in some of the stuff that was in the way of the inner frame in the shipping container. Then we got help from CSBF to get it on a forklift and bring it over to the high bay.
In the meantime, Britt and Seth moved the ACS and flight computer over to near where Franky has the BROs set up so they can do some software testing with the BROs.
Pictures:
https://picasaweb.google.com/104253244018605213307/EBEXInAntarctica20121104
In the afternoon, Michele, Shaul, and I went out into the cold to bring in some of the stuff that was in the way of the inner frame in the shipping container. Then we got help from CSBF to get it on a forklift and bring it over to the high bay.
In the meantime, Britt and Seth moved the ACS and flight computer over to near where Franky has the BROs set up so they can do some software testing with the BROs.
Pictures:
https://picasaweb.google.com/104253244018605213307/EBEXInAntarctica20121104
Day 10, November 3, 2012 -- Closed and pumping!
Another productive day in the high bay. The biggest news, in my opinion, is that the cryostat is closed and we are in the process of pumping most of the air out of it. This is a big milestone, and we encountered no major problems, which is encouraging! Kyle and I ended up needing to stay a little later than the shuttle bus runs, so we arranged for Dave Sullivan, the CSBF Antarctic operations manager, to drive back a bit later in one of the NSF vans to pick us up.
Chappy got the second star camera closed up, Michele finished all of the modifications to the flight computer, and our detector readout hardware arrived from Montreal, so Franky and Jeff spent some time unpacking and setting it up.
In addition, Shaul arrived late yesterday from Minnesota, so he spent his first full day here in Antarctica today.
Pictures (mostly EBEX hardware):
https://picasaweb.google.com/104253244018605213307/EBEXInAntarctica20121103
Chappy got the second star camera closed up, Michele finished all of the modifications to the flight computer, and our detector readout hardware arrived from Montreal, so Franky and Jeff spent some time unpacking and setting it up.
In addition, Shaul arrived late yesterday from Minnesota, so he spent his first full day here in Antarctica today.
Pictures (mostly EBEX hardware):
https://picasaweb.google.com/104253244018605213307/EBEXInAntarctica20121103
Thursday, November 1, 2012
Day 9, November 2, 2012 -- Closer to closing
The cryostat team (Kyle, Jeff, and myself) managed to get the cryostat a fair amount of the way towards being closed up and on the vacuum pump. We removed the instrument after yesterday's aligning, Jeff installed the HWP system and fully tested it, Kyle and I finished the instrument's thermal and electrical connections, we re-installed the optical filters in the optics stack at 4K and 77K, re-installed the instrument for the final time into the cryostat, installed SQUIDs, and connected detectors to their SQUID boards. Whew! Tomorrow, all we have left to do is wiring checks, closing up shells, and installing the window assembly before pumping.
The gondola team was also busy. Michele finished re-assembling the rotator while Britt worked on debugging the temperature channels in the gondola thermometry. In addition, Chappy and Michele reassembled the first star camera (unfortunately named ESC0, because Chappy is a computer scientist at heart who loves zero-indexing) to get it ready for its dry nitrogen purge. Seth was probably also really productive, but it's hard to see progress in software in the high bay on a day to day basis.
Only a few pictures today:
https://picasaweb.google.com/104253244018605213307/EBEXInAntarctica20121102
The gondola team was also busy. Michele finished re-assembling the rotator while Britt worked on debugging the temperature channels in the gondola thermometry. In addition, Chappy and Michele reassembled the first star camera (unfortunately named ESC0, because Chappy is a computer scientist at heart who loves zero-indexing) to get it ready for its dry nitrogen purge. Seth was probably also really productive, but it's hard to see progress in software in the high bay on a day to day basis.
Only a few pictures today:
https://picasaweb.google.com/104253244018605213307/EBEXInAntarctica20121102
Day 8, November 1, 2012 -- Take a hike!
Ok, we did stuff in the high bay today, sure. Kyle and I finished the alignment of all the lenses in the cryostat. Michele and Jeff put the rotator back together. Franky worked on DfMUX board heatsinking, yadda yadda yadda.
The real excitement today came after the work day had ended. Kyle, Franky, Chappy, Joy, and myself went on a hike up to the top of Observation (Ob) Hill, the really pointy hill right next to McMurdo base. Despite being a relatively short hike, the vertical gain was about 750 feet in about 1.5 miles, and it was surprisingly difficult, with loose rock and a fair amount of snow combining with steep dropoffs making it somewhat treacherous. And the wind was also nuts, probably blowing at about 20-30 mph in combination with the near-zero-Fahrenheit temperatures. Still, we prevailed, and I was able to take a picture of us triumphant at the top thanks to having lugged my tripod all the way up.
Pictures:
https://picasaweb.google.com/104253244018605213307/EBEXInAntarctica20121101
The real excitement today came after the work day had ended. Kyle, Franky, Chappy, Joy, and myself went on a hike up to the top of Observation (Ob) Hill, the really pointy hill right next to McMurdo base. Despite being a relatively short hike, the vertical gain was about 750 feet in about 1.5 miles, and it was surprisingly difficult, with loose rock and a fair amount of snow combining with steep dropoffs making it somewhat treacherous. And the wind was also nuts, probably blowing at about 20-30 mph in combination with the near-zero-Fahrenheit temperatures. Still, we prevailed, and I was able to take a picture of us triumphant at the top thanks to having lugged my tripod all the way up.
Pictures:
https://picasaweb.google.com/104253244018605213307/EBEXInAntarctica20121101
Wednesday, October 31, 2012
Day 7, October 31, 2012 -- Halloween, Antarctica
Lots of activity at the high bay today. Kyle and I continued our alignment of the "instrument" optics and were finished by 2PM and have started finishing up the rest of the instrument (putting on the shielding, cryogenics, and wiring). Jeff removed one of the baffles from inside the cryostat and removed our neutral density filter, used in Palestine to attenuate the signal so our detectors wouldn't be saturated and useless there, in preparation for flying at balloon altitudes.
On the ACS/gondola side, Britt continued rewiring the solar power crates and Chappy continued work on one of the star cameras, preparing to purge the pressure vessel with nitrogen gas. We also brought our rotator in and Michele set about cleaning and re-lubricating the bearings. Jeff had a little bit of time free so he helped Britt by drilling some holes on the gondola for the charge controller covers.
We also had a subset of the Aussie crew stop by to check out what we were doing. And in the evening a few of us went to a screening of one episode of the "Frozen Earth" documentary series. Even though it is Halloween, McMurdo's big Halloween party was last weekend, and I missed it. In the spirit of the day and the location, though, Chappy dressed as a penguin.
Pictures:
https://picasaweb.google.com/104253244018605213307/EBEXInAntarctica20121031
On the ACS/gondola side, Britt continued rewiring the solar power crates and Chappy continued work on one of the star cameras, preparing to purge the pressure vessel with nitrogen gas. We also brought our rotator in and Michele set about cleaning and re-lubricating the bearings. Jeff had a little bit of time free so he helped Britt by drilling some holes on the gondola for the charge controller covers.
We also had a subset of the Aussie crew stop by to check out what we were doing. And in the evening a few of us went to a screening of one episode of the "Frozen Earth" documentary series. Even though it is Halloween, McMurdo's big Halloween party was last weekend, and I missed it. In the spirit of the day and the location, though, Chappy dressed as a penguin.
Pictures:
https://picasaweb.google.com/104253244018605213307/EBEXInAntarctica20121031
Tuesday, October 30, 2012
Day 6, October 30, 2012 -- Made to measure
Today was my first full day in Antarctica, which meant that I actually had to do some work. Kyle finished up connecting the detector wiring inside the instrument's RF shielding towers and Jeff did wire checks on the HWP assembly. I started disassembling the cryostat optics stack in preparation for eventual lens alignment measurements.
In the afternoon, Kyle and I started the often frustrating and lengthy task of lens alignment. We got the first two lenses aligned before we had to leave the high bay for the day. Luckily, we got to take the more-comfortable TerraBus transport (nicknamed "Ivan"...as in "Ivan the TerraBus". Yep.), which takes about 35 minutes to get from the LDB camp back to McMurdo. The route to and from McMurdo winds around Ross Island, passing by the New Zealand base on Ross Island, Scott Base, before heading out onto the ice shelf in the shadow of Mt. Erebus.
We were joined in the morning by Zak, Jamie, and Chin-Lin from the Keck Array experiment, a competitor in the CMB polarization game that's based at the South Pole. They are 'in transit' on their way to the Pole to work on Keck, but have been delayed getting out due to plane mechanical issues. There are a lot of people at the base that are supposed to have already left (including the 54 Aussies who were headed out to the Australian base but had to return to McMurdo due to bad weather), making McMurdo pretty crowded. Hopefully those people will start filtering out over the next few days (assuming the plane gets fixed!) and things will settle down a bit in town.
In the evening, after dinner, we attended an outdoor safety briefing which highlighted some of the hiking routes around McMurdo and the necessary safety precautions one must take when out and about. We're planning on taking a hike maybe tomorrow or Thursday.
Pictures:
https://picasaweb.google.com/104253244018605213307/EBEXInAntarctica20121030
In the afternoon, Kyle and I started the often frustrating and lengthy task of lens alignment. We got the first two lenses aligned before we had to leave the high bay for the day. Luckily, we got to take the more-comfortable TerraBus transport (nicknamed "Ivan"...as in "Ivan the TerraBus". Yep.), which takes about 35 minutes to get from the LDB camp back to McMurdo. The route to and from McMurdo winds around Ross Island, passing by the New Zealand base on Ross Island, Scott Base, before heading out onto the ice shelf in the shadow of Mt. Erebus.
We were joined in the morning by Zak, Jamie, and Chin-Lin from the Keck Array experiment, a competitor in the CMB polarization game that's based at the South Pole. They are 'in transit' on their way to the Pole to work on Keck, but have been delayed getting out due to plane mechanical issues. There are a lot of people at the base that are supposed to have already left (including the 54 Aussies who were headed out to the Australian base but had to return to McMurdo due to bad weather), making McMurdo pretty crowded. Hopefully those people will start filtering out over the next few days (assuming the plane gets fixed!) and things will settle down a bit in town.
In the evening, after dinner, we attended an outdoor safety briefing which highlighted some of the hiking routes around McMurdo and the necessary safety precautions one must take when out and about. We're planning on taking a hike maybe tomorrow or Thursday.
Pictures:
https://picasaweb.google.com/104253244018605213307/EBEXInAntarctica20121030
Monday, October 29, 2012
Day 5, October 29, 2012 -- Ice, Ice, Baby.
I awoke at 4:30 AM in order to get ready for our 5:30AM pickup to go back to the CDC for our flight to the ice. I decided to redistribute some of my clothing in more usable manner for flight. Basically the way it works is you get one carry-on bag and as many checked bags as you want as long as the total weight is under 150 lbs. You designate one of your checked bags as a "boomerang" bag -- if the plane has to turn back to New Zealand due to weather conditions at McMurdo, you're given back your boomerang bag but your other luggage is left palletized for easy loading. And you have to carry on or wear on your person a fair amount of your ECW gear. Anyway, it requires a bit of thinking to figure out how best to distribute all of your stuff.
At around 8AM, after a video briefing, we boarded a shuttle bus that took us across the street to the plane, a C-17 Globemaster III cargo plane. The plane itself was outfitted with a section of airline style seats along with a row of jump seats along each side of the plane. Besides the roughly 100 passengers on their way to Antarctica, we were joined by a large cryogenic tank of liquid oxygen in the cargo hold as well as a bunch of other, less dangerous, cargo in the rear of the plane.
The flight takes about 5 hours, and was completely uneventful. If not for the exposed ducting and wiring, it feels a lot like being on a regular airliner. It's not even much louder.
Stepping off the plane is a sight to behold. We land on the Ross Ice Shelf, and walking out we see Ross Island in the near distance (which is where McMurdo is located) as well as the majestic Mount Erebus, an active nearly-13,000-foot-tall volcano that is something like 30 miles away but looks like it's just behind Ross Island. And we were lucky enough to have absolutely stunning weather, with clear blue skies and relatively warm weather (I'd estimate it was about 15 or 20 degrees F). I met up with the CSBF LDB program coordinator in Antarctica, Dave, after our post-flight debriefing/orientation and we headed out to Williams Field, where the LDB program is located. I was able to meet up with the rest of the crew that had already arrived and found a high bay already organized and set up for efficient working. The gondola outer frame is sitting in the high bay while the inner frame is still in the shipping container. The cryostat is open and Kyle and Jeff have been working on assembling the instrument.
We left the LDB camp at 5:30PM, taking a ride on one of the older people transports (called "the Delta") and headed back to McMurdo for dinner, etc. Kyle helped me reset the bed height in my room -- apparently McMurdo is very crowded this year, and I am the third person in what is supposed to be a two-person dorm room, which means I have a top bunk and no place to store my belongings. One my roommates is a CSBF rigger, but the other is a scientist who is scheduled to leave for a field camp in early November, so hopefully we'll have some more breathing room after that.
Word to your mother.
Pictures:
https://picasaweb.google.com/104253244018605213307/EBEXInAntarctica20121029
At around 8AM, after a video briefing, we boarded a shuttle bus that took us across the street to the plane, a C-17 Globemaster III cargo plane. The plane itself was outfitted with a section of airline style seats along with a row of jump seats along each side of the plane. Besides the roughly 100 passengers on their way to Antarctica, we were joined by a large cryogenic tank of liquid oxygen in the cargo hold as well as a bunch of other, less dangerous, cargo in the rear of the plane.
The flight takes about 5 hours, and was completely uneventful. If not for the exposed ducting and wiring, it feels a lot like being on a regular airliner. It's not even much louder.
Stepping off the plane is a sight to behold. We land on the Ross Ice Shelf, and walking out we see Ross Island in the near distance (which is where McMurdo is located) as well as the majestic Mount Erebus, an active nearly-13,000-foot-tall volcano that is something like 30 miles away but looks like it's just behind Ross Island. And we were lucky enough to have absolutely stunning weather, with clear blue skies and relatively warm weather (I'd estimate it was about 15 or 20 degrees F). I met up with the CSBF LDB program coordinator in Antarctica, Dave, after our post-flight debriefing/orientation and we headed out to Williams Field, where the LDB program is located. I was able to meet up with the rest of the crew that had already arrived and found a high bay already organized and set up for efficient working. The gondola outer frame is sitting in the high bay while the inner frame is still in the shipping container. The cryostat is open and Kyle and Jeff have been working on assembling the instrument.
We left the LDB camp at 5:30PM, taking a ride on one of the older people transports (called "the Delta") and headed back to McMurdo for dinner, etc. Kyle helped me reset the bed height in my room -- apparently McMurdo is very crowded this year, and I am the third person in what is supposed to be a two-person dorm room, which means I have a top bunk and no place to store my belongings. One my roommates is a CSBF rigger, but the other is a scientist who is scheduled to leave for a field camp in early November, so hopefully we'll have some more breathing room after that.
Word to your mother.
Pictures:
https://picasaweb.google.com/104253244018605213307/EBEXInAntarctica20121029
Day 4, October 28, 2012 -- The clothes make the man
On Sunday, I went to the USAP Clothing Distribution Center (CDC) to be outfitted with my Extreme Cold Weather (ECW) gear that everyone deploying to the ice is issued. It was there that I realized I had brought way too much stuff -- one of the advantages of living in Minnesota is that I already have a whole bunch of clothing suitable to significantly sub-freezing conditions (though probably not the"extreme" cold that Antarctica can have). So I brought a fair amount of that stuff with me...and once I got to the CDC I realized it was mostly redundant with clothing we were issued. Ah well.
On the way to the CDC I met up with a few members of another CMB telescope, the Keck Array, who were also heading to the Antarctic. While their final destination is the South Pole Station, they have to go through McMurdo first. I also met up with Franky at the CDC. After we got our clothing, we went to grab a beer at a bar just outside the City Centre area. Afterward, Franky and I went to a place called the Brewers Arms which offers a "Wild Meat Plate" that includes pork, kangaroo, ostrich, and venison, all served on a hot stone. For what it's worth -- kangaroo is delicious.
Pictures:
https://picasaweb.google.com/104253244018605213307/EBEXInAntarctica20121028
On the way to the CDC I met up with a few members of another CMB telescope, the Keck Array, who were also heading to the Antarctic. While their final destination is the South Pole Station, they have to go through McMurdo first. I also met up with Franky at the CDC. After we got our clothing, we went to grab a beer at a bar just outside the City Centre area. Afterward, Franky and I went to a place called the Brewers Arms which offers a "Wild Meat Plate" that includes pork, kangaroo, ostrich, and venison, all served on a hot stone. For what it's worth -- kangaroo is delicious.
Pictures:
https://picasaweb.google.com/104253244018605213307/EBEXInAntarctica20121028
Subscribe to:
Posts (Atom)